265/30R20 vs 245/35R19 tire size comparison

Change either size and everything below updates.

Start from your car make, model, year
Current tire size
/R
xR
New tire size
/R
xR

Width in mm · aspect = sidewall height as a % of width · rim in inches

Flotation (LT) sizes, all in inches: overall diameter × section width, then rim

Within the usual 3% rule

−1.93% diameter

Most fitment guides accept up to 3%. Check clearance at full lock and full suspension compression before committing.

  • Needs 19″ wheels: this tire does not fit your 20″ rims.
  • 20 mm narrower: check the tire is approved for your rim width.

TireWheelGuide may earn a commission from purchases made through these links.

Measurement265/30R20245/35R19Diff%
Overall diameter26.26″667 mm25.75″654 mm−0.51″−1.9%
Section width265.0 mm245.0 mm−20.0 mm−7.5%
Sidewall height79.5 mm85.8 mm+6.3 mm+7.9%
Rim diameter20″19″−1″−5.0%
Circumference82.50″2095 mm80.90″2055 mm−1.60″−1.9%
Revolutions per mileturns per distance; drives the odometer768477 /km783487 /km+15+2.0%
Ride height change——−0.25″ −6.5 mm

Speedometer reading

Speedo shows
60mph
97 km/h
Actual speed
58.8mph
95 km/h

Overlay

265/30R20245/35R19

How to use the tire size calculator

Put your current tire size — width, aspect ratio and rim diameter — into the first form, then your desired size into the second. You’ll get the difference between the new and the old size, plus the speedometer reading difference and your actual speed on the new set. Both metric and flotation (LT inch) sizes are supported.

The calculator helps you decide whether a set of tires and wheels will fit your car. To compare tires by brand and model instead, use our tire comparison tool; to look up factory sizes, browse by car make.

Reading a tire size

225/45R17
225
Section width in millimetres
45
Aspect ratio — sidewall height as a % of width
R
Radial construction
17
Rim diameter in inches

Full guide to the tire sidewall →

Sizes often compared with 265/30R20