1985 Alpine A310 tire and wheel sizes, bolt pattern and tire pressure

Bolt patterns 3x150 or 4x98, depending on the market version.

Tires for the 1985 Alpine A310

Sizes most trims come with first. Open your trim below for its exact size.

  1. 190/55R13 front + 220/55R14 rear Best-rated standard on 1 trim
  2. 205/50R15 Best-rated standard on 1 trim
  3. 205/50R15 front + 285/40R15 rear Best-rated standard on 1 trim

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1985
3
Generation
I

3 trims sold in 1985

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Alpine A310 I

1971–1985 3 trims
A310 2700 VA 148 hp · 2.7L PRV V6 190/55VR13 / 220/55VR14 1 fitment
Generation
I · 1971–1985
Power
148 hp
Engine
2.7L PRV V6, Petrol
Center bore
N/A
Bolt pattern
3x150
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
Front190/55VR13Rim 13x5.3 3x15022 psi
Rear220/55VR14Rim 14x7.7 3x15029 psi
A310 2700 VAA 148 hp · 2.7L PRV I4 205/50VR15 / 285/40VR15 1 fitment
Generation
I · 1971–1985
Power
148 hp
Engine
2.7L PRV I4, Petrol
Center bore
60.1 mm
Bolt pattern
4x98
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
Front205/50VR15Rim 15x7.5 4x9825 psi
Rear285/40VR15Rim 15x10 4x9835 psi
A310 2900 VAA 193 hp · 2.9L PRV V6 205/50VR15 1 fitment
Generation
I · 1971–1985
Power
193 hp
Engine
2.9L PRV V6, Petrol
Center bore
60.1 mm
Bolt pattern
4x98
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
205/50VR15Rim 15x10 10J 4x9825 psi
What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1985
3
Generation
I
Other years
All years (1971–1985)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator