2004 Aston Martin DB7 Vantage tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x120.65 on every 2004 trim.

Tires for the 2004 Aston Martin DB7 Vantage

Sizes most trims come with first. Open your trim below for its exact size.

245/40R18 front + 265/35R18 rear Best-rated standard on 1 trim

Check price on Amazon · 245/40R18 front Check price on Amazon · 265/35R18 rear
245/35R19 front + 275/30R19 rear Best-rated optional on 1 trim

Check price on Amazon · 245/35R19 front Check price on Amazon · 275/30R19 rear
255/30R20 front + 285/25R20 rear Best-rated optional on 1 trim

Check price on Amazon · 255/30R20 front Check price on Amazon · 285/25R20 rear

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2004: 1
Generation: NP
Other years: 1999
2000
2001
2002
2003
2004
All years (1999–2004)

1 trim sold in 2004

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Aston Martin DB7 Vantage NP

1999–2004 1 trim

DB7 Vantage 5.9 414 hp · 5.9L AM11 V12 245/40R18 95W / 265/35R18 97W 3 fitments

Generation: NP · 1999–2004
Power: 414 hp
Engine: 5.9L AM11 V12, Petrol
Center bore: 73.8 mm
Bolt pattern: 5x120.65
Thread: 1/2" - 20 UNF

Check price on Amazon · 245/40R18 Check price on Amazon · 265/35R18 Wheels 18x8 ET33 · 5x120.65 · 73.8 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
Front245/40R18 95W	Rim 18x8 ET33 5x120.65	35 psi
Rear265/35R18 97W	Rim 18x9 ET40 5x120.65	38 psi
Front245/35R19 93Y	Rim 19x8.5 ET28 5x120.65	38 psi
Rear275/30R19 95Y	Rim 19x9.5 ET40 5x120.65	39 psi
Front255/30R20 93Z	Rim 20x9 ET25 5x120.65	38 psi
Rear285/25R20 95Z	Rim 20x10 ET35 5x120.65	41 psi

How to read 95W: 95 is the load index (up to 1,521 lb / 690 kg per tire) and W the speed rating (up to 168 mph / 270 km/h). ET33 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.