1991 Audi 200 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x112 on every 1991 trim.

Tires for the 1991 Audi 200

Sizes most trims come with first. Open your trim below for its exact size.

195/65R15 Best-rated standard on 4 trims

Check price on Amazon · 195/65R15
215/60R15 Best-rated optional on 4 trims

Check price on Amazon · 215/60R15
205/60R15 Best-rated optional on 3 trims

Check price on Amazon · 205/60R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1991: 4
Generation: C3
Other years: 1984
1985
1986
1987
1988
1989
1990
1991
All years (1979–1991)

4 trims sold in 1991

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Audi 200 C3

1983–1991 4 trims

200 2.2 20V Turbo Quattro 217 hp · 2.2L 3B I5 195/65R15 91H 2 fitments

Generation: C3 · 1983–1991
Power: 217 hp
Engine: 2.2L 3B I5, Petrol
Center bore: 57.1 mm
Bolt pattern: 5x112
Thread: M14 x 1.5

Check price on Amazon · 195/65R15 Wheels 15x7 ET35 · 5x112 · 57.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195/65R15 91H	Rim 15x7 ET35 ~~5x112~~	–
215/60R15 94Z	Rim 15x7.5 ET35 ~~5x112~~	35 psi

How to read 91H: 91 is the load index (up to 1,356 lb / 615 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET35 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

200 2.2 Turbo +2 variants 162 hp · 2.2L MC I5 195/65R15 91H 3 fitments

Same tires and wheels on: 2.2 Turbo Quattro, 2.3

Generation: C3 · 1983–1991
Power: 162 hp
Engine: 2.2L MC I5, Petrol
Center bore: 57.1 mm
Bolt pattern: 5x112
Thread: M14 x 1.5

Check price on Amazon · 195/65R15 Wheels 15x7 ET35 · 5x112 · 57.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195/65R15 91H	Rim 15x7 ET35 ~~5x112~~	–
205/60R15 90V	Rim 15x7 ET35 ~~5x112~~	30 psi
215/60R15 94Z	Rim 15x7.5 ET35 ~~5x112~~	35 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.