1986 Audi 90 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1986 trim.

Tires for the 1986 Audi 90

Sizes most trims come with first. Open your trim below for its exact size.

  1. 195/60R14 Best-rated standard on 7 trims
  2. 185/60R14 Best-rated optional on 7 trims
  3. 185/65R14 Best-rated optional on 7 trims

Also listed: 175/70R14

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1986
7
Generation
B2

7 trims sold in 1986

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Audi 90 B2

1984–1987 7 trims
90 1.6 TD +4 variants 68 hp · CY I4 · Diesel 195/60R14 86H 3 fitments

Same tires and wheels on: 2.0, 2.2

Generation
B2 · 1984–1987
Power
68 hp
Engine
CY I4, Diesel
Center bore
57.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
195/60R14 86HRim 14x6 ET45 4x10029 psi
185/65R14 82HRim 14x5.5 ET45 4x10023 psi
185/60R14 86HRim 14x6 ET45 4x10029 psi

How to read 86H: 86 is the load index (up to 1,168 lb / 530 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

90 2.2 quattro +1 variant 118 hp · JT I5 195/60R14 86H 4 fitments

2 versions of this trim share these tires and wheels.

Generation
B2 · 1984–1987
Power
118 hp
Engine
JT I5, Petrol
Center bore
57.1 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
195/60R14 86HRim 14x6 ET45 4x10029 psi
185/65R14 82HRim 14x5.5 ET45 4x10023 psi
175/70R14 84TRim 14x6 ET45 4x10023 psi
185/60R14 86HRim 14x6 ET45 4x10029 psi

How to read 86H: 86 is the load index (up to 1,168 lb / 530 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1986
7
Generation
B2
Other years
All years (1984–1995)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator