2019 Audi SQ8 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x112 on every 2019 trim.

Tires for the 2019 Audi SQ8

Sizes most trims come with first. Open your trim below for its exact size.

285/45R21 Best-rated standard on 1 trim

Check price on Amazon · 285/45R21
265/50R20 Best-rated optional on 1 trim

Check price on Amazon · 265/50R20
285/40R22 Best-rated optional on 1 trim

Check price on Amazon · 285/40R22

Also listed: 285/35R23

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2019: 1
Generation: 4MN
Other years: 2019
2020
2021
2022
2023
2024
2025
2026
All years (2019–2027)

1 trim sold in 2019

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Audi SQ8 4MN

2019–2023 1 trim

SQ8 SQ8 TDi quattro 429 hp · 4.0L DHV V8 · Diesel 285/45R21 113Y 5 fitments

Generation: 4MN · 2019–2023
Power: 429 hp
Engine: 4.0L DHV V8, Diesel
Center bore: 66.5 mm
Bolt pattern: 5x112
Thread: M14 x 1.5

Check price on Amazon · 285/45R21 Wheels 21x10 ET20 · 5x112 · 66.5 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
285/45R21 113Y	Rim 21x10 ET20 ~~5x112~~	36 psi
265/50R20 111H	Rim 20x8.5 ET20 ~~5x112~~	36 psi
285/45R21 113V	Rim 21x10 ET20 ~~5x112~~	36 psi
285/40R22 110Y	Rim 22x10 ET21 ~~5x112~~	36 psi
285/35R23 107Y	Rim 23x10 ET15 ~~5x112~~	39 psi

How to read 113Y: 113 is the load index (up to 2,535 lb / 1,150 kg per tire) and Y the speed rating (up to 186 mph / 300 km/h). ET20 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.