Bugatti EB112 I
1993–1995 1 trimEB112 6.0i 451 hp · V12 245/40R18 / 325/30R18 1 fitment
- Generation
- I · 1993–1995
- Power
- 451 hp
- Engine
- V12, Petrol
- Center bore
- 65.1 mm
- Bolt pattern
- 5x120.65
- Thread
- M14 x 2.0
1995 Bugatti EB112 tire and wheel sizes, bolt pattern and tire pressure
Bolt pattern 5x120.65 on every 1995 trim.
Tires for the 1995 Bugatti EB112
Sizes most trims come with first. Open your trim below for its exact size.
TireWheelGuide may earn a commission from purchases made through these links.
- Trims sold in 1995
- 1
- Generation
- I
- Other years
- All years (1993–1995)
1 trim sold in 1995
Open a trim for its tire and rim sizes, bolt pattern and tire pressure.
No trims match these filters
Try a trim name or an engine size like 2.0L.
What these columns mean
- Rim size
- Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
- Bolt pattern (PCD)
- Number of studs and the diameter of the circle they sit on. It must match exactly.
- Center bore
- Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
- Pressure
- Recommended cold inflation pressure for that axle, in psi.
- Staggered
- A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
- Thread size
- Lug bolt or nut thread — needed when buying aftermarket fasteners.
- Trims sold in 1995
- 1
- Generation
- I
- Other years
- All years (1993–1995)
Considering a different size?
Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.
