2000 Chevrolet Blazer tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x120.65 on every 2000 trim.

Tires for the 2000 Chevrolet Blazer

Sizes most trims come with first. Open your trim below for its exact size.

205/75R15 Best-rated standard on 1 trim

Check price on Amazon · 205/75R15
235/70R15 Best-rated optional on 1 trim

Check price on Amazon · 235/70R15
235/75R15 Best-rated optional on 1 trim

Check price on Amazon · 235/75R15

Also listed: 31x10.50R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2000: 1
Generation: IV
Other years: 1996
1997
1998
1999
2000
2001
2002
2003
All years (1969–2026)

1 trim sold in 2000

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Chevrolet Blazer IV

1997–2005 1 trim

Blazer 4.3 190 hp · V6 205/75R15 97S 4 fitments

Generation: Facelift · 1997–2005
Power: 190 hp
Engine: V6, Petrol
Center bore: 70.3 mm
Bolt pattern: 5x120.65
Thread: 1/2" - 20 UNF

Check price on Amazon · 205/75R15 Wheels 15x7 ET50 · 5x120.65 · 70.3 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/75R15 97S	Rim 15x7 ET50 ~~5x120.65~~	35 psi
235/70R15 102S	Rim 15x7 ET50 ~~5x120.65~~	32 psi
235/75R15 105S	Rim 15x7 ET50 ~~5x120.65~~	32 psi
31x10.50 R15 109Q	Rim 15x7 ET50 ~~5x120.65~~	30 psi

How to read 97S: 97 is the load index (up to 1,609 lb / 730 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.