2006 Chevrolet Blazer tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x120.65 on every 2006 trim.

Tires for the 2006 Chevrolet Blazer

Sizes most trims come with first. Open your trim below for its exact size.

225/75R15 Best-rated standard on 2 trims

Check price on Amazon · 225/75R15
235/75R15 Best-rated optional on 2 trims

Check price on Amazon · 235/75R15
235/70R16 Best-rated optional on 1 trim

Check price on Amazon · 235/70R16

Also listed: 235/75R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2006: 2
Generation: Blazer
Other years: 2002
2003
2004
2005
2006
2007
2008
2009
All years (1969–2026)

2 trims sold in 2006

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Chevrolet Blazer Blazer

2001–2011 2 trims

Blazer 2.4i 126 hp · I4 225/75R15 3 fitments

Generation: Blazer · 2001–2011
Power: 126 hp
Engine: I4, Petrol
Center bore: 70.3 mm
Bolt pattern: 5x120.65
Thread: M12 x 1.5

Check price on Amazon · 225/75R15 Wheels 15x7 ET36 · 5x120.65 · 70.3 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
225/75R15	Rim 15x7 ET36 ~~5x120.65~~	–
235/75R15	Rim 15x7 ET50 ~~5x120.65~~	–
235/75R16	Rim 16x7 ET50 ~~5x120.65~~	–

Blazer 2.8 TDI 138 hp · I4 · Diesel 225/75R15 105S 3 fitments

Generation: Blazer · 2001–2011
Power: 138 hp
Engine: I4, Diesel
Center bore: 70.3 mm
Bolt pattern: 5x120.65
Thread: M12 x 1.5

Check price on Amazon · 225/75R15 Wheels 15x7 ET36 · 5x120.65 · 70.3 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
225/75R15 105S	Rim 15x7 ET36 ~~5x120.65~~	35 psi
235/70R16 105T	Rim 16x7 ET50 ~~5x120.65~~	35 psi
235/75R15 105S	Rim 15x7 ET50 ~~5x120.65~~	35 psi

How to read 105S: 105 is the load index (up to 2,039 lb / 925 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET36 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.