2004 Chevrolet Impala tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x115 on every 2004 trim.

Tires for the 2004 Chevrolet Impala

Sizes most trims come with first. Open your trim below for its exact size.

225/60R16 Best-rated standard on 2 trims

Check price on Amazon · 225/60R16
235/55R17 Best-rated standard on 1 trim

Check price on Amazon · 235/55R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2004: 3
Generation: VIII
Other years: 2000
2001
2002
2003
2004
2005
2006
2007
All years (1958–2020)

3 trims sold in 2004

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Chevrolet Impala VIII

2000–2005 3 trims

Impala 3.4 +1 variant 180 hp · V6 225/60R16 97H 1 fitment

Same tires and wheels on: 3.8

Generation: VIII · 2000–2005
Power: 180 hp
Engine: V6, Petrol
Center bore: 70.3 mm
Bolt pattern: 5x115
Thread: M12 x 1.5

Check price on Amazon · 225/60R16 Wheels 16x6.5 ET52 · 5x115 · 70.3 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
225/60R16 97H	Rim 16x6.5 ET52 ~~5x115~~	30 psi

How to read 97H: 97 is the load index (up to 1,609 lb / 730 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET52 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Impala 3.8 SS 240 hp · V6 235/55R17 98W 1 fitment

Generation: VIII · 2000–2005
Power: 240 hp
Engine: V6, Petrol
Center bore: 70.3 mm
Bolt pattern: 5x115
Thread: M12 x 1.5

Check price on Amazon · 235/55R17 Wheels 17x6.5 ET52 · 5x115 · 70.3 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
235/55R17 98W	Rim 17x6.5 ET52 ~~5x115~~	30 psi

How to read 98W: 98 is the load index (up to 1,653 lb / 750 kg per tire) and W the speed rating (up to 168 mph / 270 km/h). ET52 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.