1997 Chevrolet S10 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x120.65 on every 1997 trim.

Tires for the 1997 Chevrolet S10

Sizes most trims come with first. Open your trim below for its exact size.

  1. 205/75R15 Best-rated standard on 3 trims
  2. 235/55R16 Best-rated optional on 2 trims
  3. 235/70R15 Best-rated optional on 1 trim

Also listed: 235/75R15 31x10.50R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1997
3
Generation
II

3 trims sold in 1997

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Chevrolet S10 II

1994–1997 3 trims
S10 2.2 2WD +1 variant 118 hp · I4 205/75R15 97S 2 fitments

Same tires and wheels on: 4.3 2WD

Generation
II · 1994–1997
Power
118 hp
Engine
I4, Petrol
Center bore
70.3 mm
Bolt pattern
5x120.65
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
205/75R15 97SRim 15x7 ET13 5x120.6535 psi
235/55R16Rim 16x8 5x120.6535 psi

How to read 97S: 97 is the load index (up to 1,609 lb / 730 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET13 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

S10 4.3 4WD 190 hp · V6 205/75R15 97S 4 fitments
Generation
II · 1994–1997
Power
190 hp
Engine
V6, Petrol
Center bore
70.3 mm
Bolt pattern
5x120.65
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
205/75R15 97SRim 15x7 ET30 5x120.6535 psi
31x10.50 R15Rim 15x7 ET30 5x120.6528 psi
235/75R15 105SRim 15x7 ET30 5x120.6535 psi
235/70R15 102SRim 15x7 ET30 5x120.6535 psi

How to read 97S: 97 is the load index (up to 1,609 lb / 730 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET30 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1997
3
Generation
II
Other years
All years (1982–2026)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator