2010 Chevrolet S10 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x120.65 on every 2010 trim.

Tires for the 2010 Chevrolet S10

Sizes most trims come with first. Open your trim below for its exact size.

225/75R15 Best-rated standard on 3 trims

Check price on Amazon · 225/75R15
235/75R15 Best-rated optional on 3 trims

Check price on Amazon · 235/75R15
235/70R16 Best-rated optional on 3 trims

Check price on Amazon · 235/70R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2010: 3
Generation: II
Other years: 2006
2007
2008
2009
2010
2011
2012
2013
All years (1982–2026)

3 trims sold in 2010

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Chevrolet S10 II

2001–2011 3 trims

S10 2.4i +2 variants 145 hp · I4 Ethanol 225/75R15 105S 3 fitments

Same tires and wheels on: 2.8 TDI

Generation: Facelift · 2001–2011
Power: 145 hp
Engine: I4 Ethanol
Center bore: 70.3 mm
Bolt pattern: 5x120.65
Thread: M12 x 1.5

Check price on Amazon · 225/75R15 Wheels 15x7 ET36 · 5x120.65 · 70.3 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
225/75R15 105S	Rim 15x7 ET36 ~~5x120.65~~	35 psi
235/70R16 105T	Rim 16x7 ET50 ~~5x120.65~~	35 psi
235/75R15 105S	Rim 15x7 ET50 ~~5x120.65~~	35 psi

How to read 105S: 105 is the load index (up to 2,039 lb / 925 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET36 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.