1988 Citroën CX tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x98 on every 1988 trim.

Tires for the 1988 Citroën CX

Sizes most trims come with first. Open your trim below for its exact size.

  1. 185/70R14 Best-rated standard on 8 trims · optional on 1
  2. 195/70R14 Best-rated standard on 1 trim · optional on 8
  3. 185xR14 optional on 9 trims

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1988
9
Generation
II

9 trims sold in 1988

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Citroën CX II

1985–1992 9 trims
CX 2.0 105 hp · 829A5 I4 195/70R14 90H 3 fitments
Generation
II · 1985–1992
Power
105 hp
Engine
829A5 I4, Petrol
Center bore
58.1 mm
Bolt pattern
5x98
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
195/70R14 90HRim 14x6 ET49 5x9829 psi
185x R14 80HRim 14x6 ET49 5x9829 psi
185/70R14 88HRim 14x6 ET49 5x9832 psi

How to read 90H: 90 is the load index (up to 1,323 lb / 600 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET49 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

CX 2.2 +7 variants 111 hp · J6TA500 I4 185/70R14 88H 3 fitments

Same tires and wheels on: 2.5 D, 2.5 DT, 2.5 GTi, 2.5 GTi Turbo, 2.5 TRi

Generation
II · 1985–1992
Power
111 hp
Engine
J6TA500 I4, Petrol
Center bore
58.1 mm
Bolt pattern
5x98
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
185/70R14 88HRim 14x6 ET49 5x9829 psi
185x R14 80HRim 14x6 ET49 5x9829 psi
195/70R14 90HRim 14x6 ET49 5x9829 psi

How to read 88H: 88 is the load index (up to 1,235 lb / 560 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET49 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1988
9
Generation
II
Other years
All years (1974–1992)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator