1998 Daewoo Matiz tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x114.3 on every 1998 trim.

Tires for the 1998 Daewoo Matiz

Sizes most trims come with first. Open your trim below for its exact size.

  1. 145/70R13 Best-rated standard on 1 trim
  2. 155/65R13 Best-rated optional on 1 trim
  3. 155/70R13 Best-rated optional on 1 trim

Also listed: 165/65R13 165/55R14 165/60R14

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1998
1
Generation
M100

1 trim sold in 1998

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Daewoo Matiz M100

1998–2000 1 trim
Matiz 0.8i 51 hp · S-TEC I3 145/70R13 71S 7 fitments
Generation
M100 · 1998–2000
Power
51 hp
Engine
S-TEC I3, Petrol
Center bore
69.1 mm
Bolt pattern
4x114.3
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
145/70R13 71SRim 13x4.5 ET45 4x114.333 psi
155/65R13 73SRim 13x4.5 ET45 4x114.332 psi
155/70R13 75SRim 13x4.5 ET45 4x114.332 psi
165/65R13 77SRim 13x4.5 ET45 4x114.332 psi
165/60R14 75SRim 14x4.5 ET45 4x114.332 psi
165/55R14 72SRim 14x4.5 ET45 4x114.335 psi
165/55R14 72SRim 14x5 ET40 4x114.335 psi

How to read 71S: 71 is the load index (up to 761 lb / 345 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1998
1
Generation
M100
Other years
All years (1998–2016)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator