2007 Dodge Caliber SRT tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2007 trim.

Tires for the 2007 Dodge Caliber SRT

Sizes most trims come with first. Open your trim below for its exact size.

225/45R19 Best-rated standard on 1 trim

Check price on Amazon · 225/45R19
245/40R19 Best-rated optional on 1 trim

Check price on Amazon · 245/40R19
225/40R20 Best-rated optional on 1 trim

Check price on Amazon · 225/40R20

Also listed: 255/35R20

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2007: 1
Generation: PM
Other years: 2007
2008
2009
2010
All years (2007–2010)

1 trim sold in 2007

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Dodge Caliber SRT PM

2007–2010 1 trim

Caliber SRT 2.4i Turbo 286 hp · I4 225/45R19 93W 4 fitments

Generation: PM · 2007–2010
Power: 286 hp
Engine: I4, Petrol
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 225/45R19 Wheels 19x7.5 ET42 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
225/45R19 93W	Rim 19x7.5 ET42 5x114.3	36 psi
245/40R19 95W	Rim 19x8 ET40 5x114.3	36 psi
225/40R20 93W	Rim 20x7.5 ET40 5x114.3	36 psi
255/35R20 93Y	Rim 20x8.5 ET38 5x114.3	39 psi

How to read 93W: 93 is the load index (up to 1,433 lb / 650 kg per tire) and W the speed rating (up to 168 mph / 270 km/h). ET42 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.