2007 Ford Crown Victoria tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2007 trim.

Tires for the 2007 Ford Crown Victoria

Sizes most trims come with first. Open your trim below for its exact size.

225/60R16 Best-rated standard on 2 trims

Check price on Amazon · 225/60R16
235/60R16 Best-rated optional on 2 trims

Check price on Amazon · 235/60R16
235/55R17 Best-rated optional on 2 trims

Check price on Amazon · 235/55R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2007: 2
Generation: II (EN114)
Other years: 2003
2004
2005
2006
2007
2008
2009
2010
All years (1992–2011)

2 trims sold in 2007

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Ford Crown Victoria II (EN114)

1998–2011 2 trims

Crown Victoria 4.6i +1 variant 224 hp · 4.6L V8 225/60R16 98T 5 fitments

2 versions of this trim share these tires and wheels.

Generation: EN114 · 1998–2011
Power: 224 hp
Engine: 4.6L V8, Petrol
Center bore: 70.5 mm
Bolt pattern: 5x114.3
Thread: 1/2" - 20 UNF

Check price on Amazon · 225/60R16 Wheels 16x7 ET54 · 5x114.3 · 70.5 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
225/60R16 98T	Rim 16x7 ET54 ~~5x114.3~~	32 psi
235/55R17 99H	Rim 17x7 ET54 ~~5x114.3~~	32 psi
235/60R16 100T	Rim 16x7 ET54 ~~5x114.3~~	32 psi
235/55R17 99H	Rim 17x7.5 ET44 ~~5x114.3~~	32 psi
235/50R18 97H	Rim 18x7.5 ET44 ~~5x114.3~~	32 psi

How to read 98T: 98 is the load index (up to 1,653 lb / 750 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET54 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.