2007 Ford Edge tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2007 trim.

Tires for the 2007 Ford Edge

Sizes most trims come with first. Open your trim below for its exact size.

  1. 235/65R17 Best-rated standard on 1 trim
  2. 245/60R18 Best-rated optional on 1 trim
  3. 245/55R19 Best-rated optional on 1 trim

Also listed: 255/50R19 245/50R20 255/45R20 265/35R22 265/40R22

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2007
1
Generation
I

1 trim sold in 2007

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Ford Edge I

2006–2010 1 trim
Edge 3.5i 265 hp · 3.5L V6 235/65R17 103T 8 fitments
Generation
I · 2006–2010
Power
265 hp
Engine
3.5L V6, Petrol
Center bore
70.5 mm
Bolt pattern
5x114.3
Thread
1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psi
235/65R17 103TRim 17x7.5 ET40 5x114.335 psi
245/60R18 104TRim 18x7.5 ET44 5x114.335 psi
245/50R20 102TRim 20x7.5 ET44 5x114.335 psi
265/40R22 101VRim 22x9 ET39 5x114.341 psi
245/55R19 102HRim 19x7.5 ET44 5x114.335 psi
255/50R19 102HRim 19x8 ET42 5x114.335 psi
255/45R20 101VRim 20x8.5 ET42 5x114.338 psi
265/35R22 99WRim 22x9 ET35 5x114.341 psi

How to read 103T: 103 is the load index (up to 1,929 lb / 875 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET40 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2007
1
Generation
I
Other years
All years (2006–2024)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator