Ford Mustang Mach 1 I
1970–1970 1 trimMustang Mach 1 5.8 2bbl 249 hp · 5.8L Windsor V8 205/70R14 2 fitments
- Generation
- Facelift · 1970
- Power
- 249 hp
- Engine
- 5.8L Windsor V8, Petrol
- Center bore
- 61.5 mm
- Bolt pattern
- 5x114.3
- Thread
- 1/2" - 20 UNF
1970 Ford Mustang Mach 1 tire and wheel sizes, bolt pattern and tire pressure
Bolt pattern 5x114.3 on every 1970 trim.
Tires for the 1970 Ford Mustang Mach 1
Sizes most trims come with first. Open your trim below for its exact size.
TireWheelGuide may earn a commission from purchases made through these links.
1 trim sold in 1970
Open a trim for its tire and rim sizes, bolt pattern and tire pressure.
No trims match these filters
Try a trim name or an engine size like 2.0L.
What these columns mean
- Rim size
- Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
- Bolt pattern (PCD)
- Number of studs and the diameter of the circle they sit on. It must match exactly.
- Center bore
- Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
- Pressure
- Recommended cold inflation pressure for that axle, in psi.
- Thread size
- Lug bolt or nut thread — needed when buying aftermarket fasteners.
Considering a different size?
Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.
