2020 Ford Mustang Mach 1 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2020 trim.

Tires for the 2020 Ford Mustang Mach 1

Sizes most trims come with first. Open your trim below for its exact size.

255/40R19 front + 275/40R19 rear Best-rated standard on 1 trim

Check price on Amazon · 255/40R19 front Check price on Amazon · 275/40R19 rear
305/30R19 Best-rated optional on 1 trim

Check price on Amazon · 305/30R19
265/35R20 Best-rated optional on 1 trim

Check price on Amazon · 265/35R20

Also listed: 265/35R20 + 285/35R20

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2020: 1
Generation: V (S550)
Other years: 1978
2003
2004
2019
2020
2021
2022
2023
All years (1969–2023)

1 trim sold in 2020

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Ford Mustang Mach 1 V (S550)

2020–2023 1 trim

Mustang Mach 1 5.0 Ti-VCT 480 hp · 5.0L V8 255/40R19 96W / 275/40R19 98W 5 fitments

Generation: V · 2020–2023
Power: 480 hp
Engine: 5.0L V8, Petrol
Center bore: 70.5 mm
Bolt pattern: 5x114.3
Thread: M14 x 1.5

Check price on Amazon · 255/40R19 Check price on Amazon · 275/40R19 Wheels 19x9 ET45 · 5x114.3 · 70.5 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
Front255/40R19 96W	Rim 19x9 ET45 ~~5x114.3~~	32 psi
Rear275/40R19 98W	Rim 19x9.5 ET52.5 ~~5x114.3~~	32 psi
Front305/30R19	Rim 19x10.5 ET30 ~~5x114.3~~	32 psi
Rear305/30R19	Rim 19x11 ET62 ~~5x114.3~~	32 psi
Front305/30R19	Rim 19x11 ET24 ~~5x114.3~~	32 psi
Rear305/30R19	Rim 19x11.5 ET56 ~~5x114.3~~	32 psi
Front265/35R20 99Y	Rim 20x9 ET40 ~~5x114.3~~	35 psi
Rear285/35R20 100Y	Rim 20x10 ET50 ~~5x114.3~~	35 psi
265/35R20 99Y	Rim 20x9 ET42.5 ~~5x114.3~~	32 psi

How to read 96W: 96 is the load index (up to 1,565 lb / 710 kg per tire) and W the speed rating (up to 168 mph / 270 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.