2021 Ford Mustang Shelby GT350 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2021 trim.

Tires for the 2021 Ford Mustang Shelby GT350

Sizes most trims come with first. Open your trim below for its exact size.

  1. 295/35R19 front + 305/35R19 rear Best-rated standard on 1 trim
  2. 305/30R19 front + 315/30R19 rear Best-rated standard on 1 trim

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2021
2
Generation
III

2 trims sold in 2021

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Ford Mustang Shelby GT350 III

2016–2021 2 trims
Mustang Shelby GT350 5.2 SC 527 hp · 5.2L V8 305/30R19 96Z / 315/30R19 96Z 1 fitment
Generation
III · 2016–2021
Power
527 hp
Engine
5.2L V8, Petrol
Center bore
70.5 mm
Bolt pattern
5x114.3
Thread
M14 x 1.5
Tire sizeRim size and bolt patternPressure, psi
Front305/30R19 96ZRim 19x11 ET24 5x114.332 psi
Rear315/30R19 96ZRim 19x11.5 ET56 5x114.332 psi
Mustang Shelby GT350 5.2 SC 526 hp · 5.2L V8 295/35R19 96Z / 305/35R19 96Z 1 fitment
Generation
III · 2016–2021
Power
526 hp
Engine
5.2L V8, Petrol
Center bore
70.5 mm
Bolt pattern
5x114.3
Thread
M14 x 1.5
Tire sizeRim size and bolt patternPressure, psi
Front295/35R19 96ZRim 19x10.5 ET30 5x114.332 psi
Rear305/35R19 96ZRim 19x11 ET62 5x114.332 psi
What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2021
2
Generation
III
Other years
All years (1965–2021)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator