2010 GAC Toyota Camry tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2010 trim.

Tires for the 2010 GAC Toyota Camry

Sizes most trims come with first. Open your trim below for its exact size.

215/60R16 Best-rated standard on 2 trims

Check price on Amazon · 215/60R16
215/55R17 Best-rated optional on 2 trims

Check price on Amazon · 215/55R17
225/45R18 Best-rated optional on 1 trim

Check price on Amazon · 225/45R18

Also listed: 235/45R18

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2010: 2
Generation: XV40
Other years: 2006
2007
2008
2009
2010
2011
2012
2013
All years (2006–2020)

2 trims sold in 2010

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

GAC Toyota Camry XV40

2009–2011 2 trims

Camry 2.0i 145 hp · 1AZ-FE I4 215/60R16 94V 3 fitments

Generation: XV40 Facelift · 2009–2011
Power: 145 hp
Engine: 1AZ-FE I4, Petrol
Center bore: 60.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 215/60R16 Wheels 16x6.5 ET45 · 5x114.3 · 60.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
215/60R16 94V	Rim 16x6.5 ET45 ~~5x114.3~~	30 psi
215/55R17 93V	Rim 17x7 ET50 ~~5x114.3~~	32 psi
225/45R18 95V	Rim 18x7 ET50 ~~5x114.3~~	32 psi

How to read 94V: 94 is the load index (up to 1,477 lb / 670 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

Camry 2.4i 165 hp · 2AZ-FE I4 215/60R16 94V 3 fitments

Generation: XV40 Facelift · 2009–2011
Power: 165 hp
Engine: 2AZ-FE I4, Petrol
Center bore: 60.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 215/60R16 Wheels 16x6.5 ET45 · 5x114.3 · 60.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
215/60R16 94V	Rim 16x6.5 ET45 ~~5x114.3~~	30 psi
215/55R17 93V	Rim 17x7 ET50 ~~5x114.3~~	32 psi
235/45R18 98W	Rim 18x7.5 ET45 ~~5x114.3~~	32 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.