2016 Genesis G80 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2016 trim.

Tires for the 2016 Genesis G80

Sizes most trims come with first. Open your trim below for its exact size.

245/40R19 front + 275/35R19 rear Best-rated standard on 1 trim

Check price on Amazon · 245/40R19 front Check price on Amazon · 275/35R19 rear
245/45R18 Best-rated optional on 1 trim

Check price on Amazon · 245/45R18

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2016: 1
Generation: I (DH)
Other years: 2016
2017
2018
2019
2020
2021
2022
2023
All years (2016–2026)

1 trim sold in 2016

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Genesis G80 I (DH)

2016–2020 1 trim

G80 3.3 GDi 278 hp · G6DH V6 245/40R19 94W / 275/35R19 96W 2 fitments

Generation: DH · 2016–2020
Power: 278 hp
Engine: G6DH V6, Petrol
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 245/40R19 Check price on Amazon · 275/35R19 Wheels 19x8.5 ET40 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
Front245/40R19 94W	Rim 19x8.5 ET40 5x114.3	33 psi
Rear275/35R19 96W	Rim 19x9 ET49 5x114.3	33 psi
245/45R18 96W	Rim 18x8 ET36 5x114.3	33 psi

How to read 94W: 94 is the load index (up to 1,477 lb / 670 kg per tire) and W the speed rating (up to 168 mph / 270 km/h). ET40 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.