2009 Holden Captiva 7 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x115 on every 2009 trim.

Tires for the 2009 Holden Captiva 7

Sizes most trims come with first. Open your trim below for its exact size.

  1. 235/60R17 Best-rated standard on 1 trim · optional on 1
  2. 215/70R16 Best-rated standard on 1 trim
  3. 235/55R18 Best-rated optional on 2 trims

Also listed: 235/50R19 245/45R19 255/45R19 255/40R20

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2009
2
Generation
CG.I

2 trims sold in 2009

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Holden Captiva 7 CG.I

2006–2015 2 trims
Captiva 7 2.0 VCDi 148 hp · I4 · Diesel 215/70R16 105T 5 fitments
Generation
CG.I · 2006–2015
Power
148 hp
Engine
I4, Diesel
Center bore
70.5 mm
Bolt pattern
5x115
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
215/70R16 105TRim 16x6.5 ET46 5x115–
235/60R17 105HRim 17x7 ET46 5x11535 psi
235/55R18 103HRim 18x7 ET46 5x11535 psi
235/50R19 101VRim 19x7 ET46 5x11538 psi
245/45R19 103VRim 19x8 ET42 5x11538 psi

How to read 105T: 105 is the load index (up to 2,039 lb / 925 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

Captiva 7 3.2i 227 hp · V6 235/60R17 105H 5 fitments
Generation
CG.I · 2006–2015
Power
227 hp
Engine
V6, Petrol
Center bore
70.5 mm
Bolt pattern
5x115
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
235/60R17 105HRim 17x7 ET46 5x11535 psi
235/55R18 103VRim 18x7 ET46 5x11535 psi
235/50R19 101VRim 19x7 ET46 5x11538 psi
255/45R19 103VRim 19x8 ET42 5x11538 psi
255/40R20 101VRim 20x8 ET42 5x11538 psi

How to read 105H: 105 is the load index (up to 2,039 lb / 925 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2009
2
Generation
CG.I
Other years
All years (2006–2018)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator