2017 Holden Colorado tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 6x139.7 on every 2017 trim.

Tires for the 2017 Holden Colorado

Sizes most trims come with first. Open your trim below for its exact size.

245/70R16 Best-rated standard on 1 trim

Check price on Amazon · 245/70R16
255/65R17 Best-rated optional on 1 trim

Check price on Amazon · 255/65R17
265/60R18 Best-rated optional on 1 trim

Check price on Amazon · 265/60R18

Also listed: 265/55R19 265/50R20

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2017: 1
Generation: RG.II
Other years: 2013
2014
2015
2016
2017
2018
2019
2020
All years (2008–2021)

1 trim sold in 2017

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Holden Colorado RG.II

2016–2021 1 trim

Colorado 2.8TD 197 hp · A 428 LWN I4 · Diesel 245/70R16 111S 5 fitments

Generation: RG.II · 2016–2021
Power: 197 hp
Engine: A 428 LWN I4, Diesel
Center bore: 100.3 mm
Bolt pattern: 6x139.7
Thread: M12 x 1.5

Check price on Amazon · 245/70R16 Wheels 16x6.5 ET33 · 6x139.7 · 100.3 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
245/70R16 111S	Rim 16x6.5 ET33 ~~6x139.7~~	35 psi
255/65R17 110S	Rim 17x7 ET33 ~~6x139.7~~	35 psi
265/60R18 110T	Rim 18x7.5 ET33 ~~6x139.7~~	35 psi
265/55R19 109H	Rim 19x8 ET30 ~~6x139.7~~	35 psi
265/50R20 108H	Rim 20x8 ET30 ~~6x139.7~~	38 psi

How to read 111S: 111 is the load index (up to 2,403 lb / 1,090 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET33 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.