1986 Holden Commodore tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x120 on every 1986 trim.

Tires for the 1986 Holden Commodore

Sizes most trims come with first. Open your trim below for its exact size.

  1. 185/75R14 Best-rated standard on 2 trims · optional on 2
  2. 175xR14 standard on 2 trims
  3. 205/65R15 Best-rated standard on 1 trim · optional on 4

Also listed: 215/55R16 225/50R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1986
5
Generation
I (VL, VK)

5 trims sold in 1986

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Holden Commodore I (VL, VK)

1984–1988 5 trims
Commodore 3.0 +1 variant 153 hp · RB30E I6 175x SR14 3 fitments

Same tires and wheels on: 3.3

Generation
VL · 1986–1988
Power
153 hp
Engine
RB30E I6, Petrol
Center bore
69.5 mm
Bolt pattern
5x120
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
175x SR14Rim 14x5.5 ET38 5x120–
185/75HR14Rim 14x6 ET43 5x120–
205/65HR15Rim 15x6 ET43 5x120–
Commodore 3.0T 201 hp · RB30ET I6 185/75HR14 3 fitments
Generation
VL · 1986–1988
Power
201 hp
Engine
RB30ET I6, Petrol
Center bore
69.5 mm
Bolt pattern
5x120
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
185/75HR14Rim 14x6 ET43 5x120–
205/65HR15Rim 15x6 ET43 5x120–
215/55VR16Rim 16x6.5 ET43 5x120–
Commodore 5.0 201 hp · V8 205/65HR15 3 fitments
Generation
VL · 1986–1988
Power
201 hp
Engine
V8, Petrol
Center bore
69.5 mm
Bolt pattern
5x120
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
205/65HR15Rim 15x6 ET43 5x120–
215/55VR16Rim 16x6.5 ET43 5x120–
225/50VR16Rim 16x7 ET43 5x120–
Commodore 5.0 N/A · V8 185/75HR14 3 fitments
Generation
VK · 1984–1986
Power
N/A
Engine
V8, Petrol
Center bore
69.5 mm
Bolt pattern
5x120
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
185/75HR14Rim 14x6 ET43 5x120–
205/65HR15Rim 15x6 ET43 5x120–
225/50SR16Rim 16x7 ET43 5x120–
What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1986
5
Generation
I (VL, VK)
Other years
All years (1984–2021)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator