2000 Holden Frontera tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 6x139.7 on every 2000 trim.

Tires for the 2000 Holden Frontera

Sizes most trims come with first. Open your trim below for its exact size.

235/75R15 Best-rated standard on 3 trims

Check price on Amazon · 235/75R15
245/70R16 Best-rated optional on 3 trims

Check price on Amazon · 245/70R16
265/60R17 Best-rated optional on 3 trims

Check price on Amazon · 265/60R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2000: 3
Generation: UE
Other years: 1996
1997
1998
1999
2000
2001
2002
2003
All years (1995–2003)

3 trims sold in 2000

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Holden Frontera UE

1999–2003 3 trims

Frontera 2.2 +2 variants 134 hp · I4 235/75R15 102S 3 fitments

Same tires and wheels on: 3.0D, 3.2

Generation: UE · 1999–2003
Power: 134 hp
Engine: I4, Petrol
Center bore: 100.5 mm
Bolt pattern: 6x139.7
Thread: M12 x 1.5

Check price on Amazon · 235/75R15 Wheels 15x7 ET38 · 6x139.7 · 100.5 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
235/75R15 102S	Rim 15x7 ET38 6x139.7	25 psi
245/70R16 102S	Rim 16x7 ET38 6x139.7	25 psi
265/60R17 102S	Rim 17x8 ET25 6x139.7	28 psi

How to read 102S: 102 is the load index (up to 1,874 lb / 850 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET38 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.