1992 Honda CR-X del Sol tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1992 trim.

Tires for the 1992 Honda CR-X del Sol

Sizes most trims come with first. Open your trim below for its exact size.

195/55R15 Best-rated standard on 2 trims

Check price on Amazon · 195/55R15
175/65R14 Best-rated standard on 1 trim

Check price on Amazon · 175/65R14

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1992: 3
Generation: CR-X del Sol
Other years: 1992
1993
1994
1995
1996
1997
1998
All years (1992–1998)

3 trims sold in 1992

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Honda CR-X del Sol CR-X del Sol

1992–1998 3 trims

CR-X del Sol 1.6 (E-EG1) 129 hp · I4 175/65R14 82H 1 fitment

Generation: CR-X del Sol · 1992–1998
Power: 129 hp
Engine: I4, Petrol
Center bore: 56.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 175/65R14 Wheels 14x5 ET45 · 4x100 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
175/65R14 82H	Rim 14x5 ET45 ~~4x100~~	–

How to read 82H: 82 is the load index (up to 1,047 lb / 475 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

CR-X del Sol 1.6 SiR (E-EG2) +1 variant 153 hp · I4 195/55R15 83V 1 fitment

2 versions of this trim share these tires and wheels.

Generation: CR-X del Sol · 1992–1998
Power: 153 hp
Engine: I4, Petrol
Center bore: 56.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 195/55R15 Wheels 15x6 ET45 · 4x100 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195/55R15 83V	Rim 15x6 ET45 ~~4x100~~	–

How to read 83V: 83 is the load index (up to 1,074 lb / 487 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.