1995 Honda Crossroad tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x165.1 on every 1995 trim.

Tires for the 1995 Honda Crossroad

Sizes most trims come with first. Open your trim below for its exact size.

205xR16 standard on 1 trim

Check price on Amazon · 205xR16
235/75R15 Best-rated optional on 1 trim

Check price on Amazon · 235/75R15
30x9.50R15 optional on 1 trim

Check price on Amazon · 30x9.50R15

Also listed: 235/70R16 255/65R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1995: 1
Generation: LJ/LJJ
Other years: 1993
1994
1995
1996
1997
1998
2007
2008
All years (1993–2010)

1 trim sold in 1995

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Honda Crossroad LJ/LJJ

1993–1998 1 trim

Crossroad 3.9 (E-LJ) 177 hp · V8 205x R16 109T 5 fitments

Generation: LJ/LJJ · 1993–1998
Power: 177 hp
Engine: V8, Petrol
Center bore: 114.3 mm
Bolt pattern: 5x165.1
Thread: M16 x 1.5

Check price on Amazon · 205xR16 Wheels 16x6 ET33 · 5x165.1 · 114.3 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205x R16 109T	Rim 16x6 ET33 ~~5x165.1~~	28 psi
235/70R16 105H	Rim 16x7 ET33 ~~5x165.1~~	28 psi
30x9.50 R15 104S	Rim 15x7 ET33 ~~5x165.1~~	28 psi
235/75R15 108S	Rim 15x7 ET33 ~~5x165.1~~	28 psi
255/65R16 109H	Rim 16x7 ET33 ~~5x165.1~~	28 psi

How to read 109T: 109 is the load index (up to 2,271 lb / 1,030 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET33 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.