2007 Honda Edix tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2007 trim.

Tires for the 2007 Honda Edix

Sizes most trims come with first. Open your trim below for its exact size.

205/55R16 Best-rated standard on 3 trims

Check price on Amazon · 205/55R16
225/45R17 Best-rated optional on 3 trims

Check price on Amazon · 225/45R17
195/65R15 Best-rated optional on 2 trims

Check price on Amazon · 195/65R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2007: 3
Generation: BE
Other years: 2004
2005
2006
2007
2008
2009
All years (2004–2009)

3 trims sold in 2007

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Honda Edix BE

2006–2009 3 trims

Edix 2.0i (ABA-BE4) +1 variant 154 hp · I4 205/55R16 89V 3 fitments

Same tires and wheels on: 2.0i (DBA-BE3)

Generation: BE Facelift · 2006–2009
Power: 154 hp
Engine: I4, Petrol
Center bore: 64.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/55R16 Wheels 16x6.5 ET50 · 5x114.3 · 64.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/55R16 89V	Rim 16x6.5 ET50 ~~5x114.3~~	–
195/65R15 91H	Rim 15x6 ET50 ~~5x114.3~~	–
225/45R17	Rim 17x7 ET46 ~~5x114.3~~	–

How to read 89V: 89 is the load index (up to 1,279 lb / 580 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Edix 2.4i (DBA-BE8) 160 hp · I4 205/55R16 89V 2 fitments

Generation: BE Facelift · 2006–2009
Power: 160 hp
Engine: I4, Petrol
Center bore: 64.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/55R16 Wheels 16x6.5 ET50 · 5x114.3 · 64.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/55R16 89V	Rim 16x6.5 ET50 ~~5x114.3~~	–
225/45R17	Rim 17x7 ET46 ~~5x114.3~~	–

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.