1992 Honda Inspire tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x114.3 on every 1992 trim.

Tires for the 1992 Honda Inspire

Sizes most trims come with first. Open your trim below for its exact size.

205/60R15 Best-rated standard on 1 trim · optional on 1

Check price on Amazon · 205/60R15
195/60R15 Best-rated standard on 1 trim

Check price on Amazon · 195/60R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1992: 2
Generation: CC
Other years: 1992
1993
1994
1995
1996
1997
1998
1999
All years (1992–2026)

2 trims sold in 1992

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Honda Inspire CC

1992–1995 2 trims

Inspire 2.0i (E-CC3) 162 hp · I5 195/60R15 88H 2 fitments

Generation: CC · 1992–1995
Power: 162 hp
Engine: I5, Petrol
Center bore: 64.1 mm
Bolt pattern: 4x114.3
Thread: M12 x 1.5

Check price on Amazon · 195/60R15 Wheels 15x6 ET55 · 4x114.3 · 64.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195/60R15 88H	Rim 15x6 ET55 ~~4x114.3~~	–
205/60R15 91H	Rim 15x6 ET55 ~~4x114.3~~	–

How to read 88H: 88 is the load index (up to 1,235 lb / 560 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET55 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Inspire 2.5i (E-CC2) 188 hp · I5 205/60R15 91H 1 fitment

Generation: CC · 1992–1995
Power: 188 hp
Engine: I5, Petrol
Center bore: 64.1 mm
Bolt pattern: 4x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/60R15 Wheels 15x6 ET55 · 4x114.3 · 64.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/60R15 91H	Rim 15x6 ET55 ~~4x114.3~~	–

How to read 91H: 91 is the load index (up to 1,356 lb / 615 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET55 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.