1997 Honda Integra SJ tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1997 trim.

Tires for the 1997 Honda Integra SJ

Sizes most trims come with first. Open your trim below for its exact size.

175/70R13 Best-rated standard on 1 trim · optional on 1

Check price on Amazon · 175/70R13
185/70R13 Best-rated standard on 1 trim · optional on 1

Check price on Amazon · 185/70R13

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1997: 2
Generation: Integra SJ
Other years: 1996
1997
1998
1999
2000
2001
All years (1996–2001)

2 trims sold in 1997

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Honda Integra SJ Integra SJ

1996–2001 2 trims

Integra SJ 1.5 (E-EK3) 103 hp · I4 175/70R13 82S 2 fitments

Generation: Integra SJ · 1996–2001
Power: 103 hp
Engine: I4, Petrol
Center bore: 56.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 175/70R13 Wheels 13x5 ET45 · 4x100 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
175/70R13 82S	Rim 13x5 ET45 ~~4x100~~	–
185/70R13 86S	Rim 13x5 ET45 ~~4x100~~	–

How to read 82S: 82 is the load index (up to 1,047 lb / 475 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

Integra SJ 1.5 (E-EK3) 129 hp · I4 185/70R13 86S 2 fitments

Generation: Integra SJ · 1996–2001
Power: 129 hp
Engine: I4, Petrol
Center bore: 56.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 185/70R13 Wheels 13x5 ET45 · 4x100 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
185/70R13 86S	Rim 13x5 ET45 ~~4x100~~	–
175/70R13 82S	Rim 13x5 ET45 ~~4x100~~	–

How to read 86S: 86 is the load index (up to 1,168 lb / 530 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.