2001 Honda S-MX tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2001 trim.

Tires for the 2001 Honda S-MX

Sizes most trims come with first. Open your trim below for its exact size.

195/65R15 Best-rated standard on 2 trims

Check price on Amazon · 195/65R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2001: 2
Generation
Other years: 1996
1997
1998
1999
2000
2001
2002
All years (1996–2002)

2 trims sold in 2001

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Honda S-MX

1999–2002 2 trims

S-MX 2.0 (GF-RH1) 138 hp · I4 195/65R15 91H 1 fitment

Generation: Facelift · 1999–2002
Power: 138 hp
Engine: I4, Petrol
Center bore: 64.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 195/65R15 Wheels 15x5.5 ET55 · 5x114.3 · 64.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195/65R15 91H	Rim 15x5.5 ET55 ~~5x114.3~~	–

How to read 91H: 91 is the load index (up to 1,356 lb / 615 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET55 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

S-MX 2.0 (GF-RH2) 138 hp · I4 195/65R15 91S 1 fitment

Generation: Facelift · 1999–2002
Power: 138 hp
Engine: I4, Petrol
Center bore: 64.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 195/65R15 Wheels 15x5.5 ET55 · 5x114.3 · 64.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195/65R15 91S	Rim 15x5.5 ET55 ~~5x114.3~~	–

How to read 91S: 91 is the load index (up to 1,356 lb / 615 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET55 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.