2002 Isuzu Ascender tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 6x127 on every 2002 trim.

Tires for the 2002 Isuzu Ascender

Sizes most trims come with first. Open your trim below for its exact size.

245/65R17 Best-rated standard on 2 trims

Check price on Amazon · 245/65R17
245/60R18 Best-rated optional on 1 trim

Check price on Amazon · 245/60R18
255/60R18 Best-rated optional on 1 trim

Check price on Amazon · 255/60R18

Also listed: 245/55R19 265/50R19 275/45R20

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2002: 2
Generation: GMT300
Other years: 2002
2003
2004
2005
2006
2007
2008
All years (2002–2008)

2 trims sold in 2002

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Isuzu Ascender GMT300

2002–2008 2 trims

Ascender 4.2i 291 hp · V6 245/65R17 107T 3 fitments

Generation: GMT300 · 2002–2008
Power: 291 hp
Engine: V6, Petrol
Center bore: 78.1 mm
Bolt pattern: 6x127
Thread: M12 x 1.5

Check price on Amazon · 245/65R17 Wheels 17x7 ET50 · 6x127 · 78.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
245/65R17 107T	Rim 17x7 ET50 ~~6x127~~	35 psi
245/60R18 107T	Rim 18x7 ET50 ~~6x127~~	35 psi
245/55R19 105H	Rim 19x7.5 ET48 ~~6x127~~	33 psi

How to read 107T: 107 is the load index (up to 2,150 lb / 975 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

Ascender 5.3i 300 hp · V8 245/65R17 107T 4 fitments

Generation: GMT300 · 2002–2008
Power: 300 hp
Engine: V8, Petrol
Center bore: 78.1 mm
Bolt pattern: 6x127
Thread: M12 x 1.5

Check price on Amazon · 245/65R17 Wheels 17x7 ET50 · 6x127 · 78.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
245/65R17 107T	Rim 17x7 ET50 ~~6x127~~	35 psi
255/60R18 107T	Rim 18x7.5 ET48 ~~6x127~~	35 psi
265/50R19 105T	Rim 19x8 ET45 ~~6x127~~	33 psi
275/45R20 105H	Rim 20x9 ET38 ~~6x127~~	30 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.