1981 Isuzu Fargo tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 6x139.7 on every 1981 trim.

Tires for the 1981 Isuzu Fargo

Sizes most trims come with first. Open your trim below for its exact size.

195xR14 standard on 2 trims

Check price on Amazon · 195xR14
205/75R15 Best-rated optional on 2 trims

Check price on Amazon · 205/75R15
205/80R14 Best-rated optional on 1 trim

Check price on Amazon · 205/80R14

Also listed: 195/80R15 215/65R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1981: 2
Generation: I
Other years: 1980
1981
1982
1983
1984
1985
1986
1987
All years (1980–2001)

2 trims sold in 1981

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Isuzu Fargo I

1980–1994 2 trims

Fargo 1.8 87 hp · I4 195x R14 100L 3 fitments

Generation: I · 1980–1994
Power: 87 hp
Engine: I4, Petrol
Center bore: 100.5 mm
Bolt pattern: 6x139.7
Thread: M12 x 1.5

Check price on Amazon · 195xR14 Wheels 14x5.5 ET30 · 6x139.7 · 100.5 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195x R14 100L	Rim 14x5.5 ET30 ~~6x139.7~~	26 psi
195/80R15 100L	Rim 15x5.5 ET30 ~~6x139.7~~	26 psi
205/75R15 100L	Rim 15x6 ET33 ~~6x139.7~~	29 psi

How to read 100L: 100 is the load index (up to 1,764 lb / 800 kg per tire) and L the speed rating (up to 75 mph / 120 km/h). ET30 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

Fargo 2.0D 59 hp · I4 · Diesel 195x R14 100L 4 fitments

Generation: I · 1980–1994
Power: 59 hp
Engine: I4, Diesel
Center bore: 100.5 mm
Bolt pattern: 6x139.7
Thread: M12 x 1.5

Check price on Amazon · 195xR14 Wheels 14x5.5 ET30 · 6x139.7 · 100.5 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
195x R14 100L	Rim 14x5.5 ET30 ~~6x139.7~~	26 psi
205/80R14 100L	Rim 14x6 ET33 ~~6x139.7~~	26 psi
205/75R15 100L	Rim 15x6 ET33 ~~6x139.7~~	26 psi
215/65R16 99M	Rim 16x6.5 ET35 ~~6x139.7~~	29 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.