1984 Lancia Trevi tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x98 on every 1984 trim.

Tires for the 1984 Lancia Trevi

Sizes most trims come with first. Open your trim below for its exact size.

175/70R14 Best-rated standard on 3 trims

Check price on Amazon · 175/70R14
185/60R15 Best-rated optional on 3 trims

Check price on Amazon · 185/60R15
195/50R16 Best-rated optional on 2 trims

Check price on Amazon · 195/50R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1984: 3
Generation: 828
Other years: 1980
1981
1982
1983
1984
1985
All years (1980–1985)

3 trims sold in 1984

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Lancia Trevi 828

1980–1985 3 trims

Trevi 1.6 99 hp · 828B.000 I4 175/70R14 82S 3 fitments

Generation: 828 · 1980–1985
Power: 99 hp
Engine: 828B.000 I4, Petrol
Center bore: 58.1 mm
Bolt pattern: 4x98
Thread: M12 x 1.25

Check price on Amazon · 175/70R14 Wheels 14x5.5 ET34 · 4x98 · 58.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
175/70R14 82S	Rim 14x5.5 ET34 4x98	26 psi
185/65R14 86S	Rim 14x5.5 ET34 4x98	26 psi
185/60R15 84H	Rim 15x6 ET35 4x98	26 psi

How to read 82S: 82 is the load index (up to 1,047 lb / 475 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET34 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Trevi 2.0 ie +1 variant 121 hp · 828B4.000 I4 175/70R14 82S 3 fitments

Same tires and wheels on: 2.0 VX

Generation: 828 · 1980–1985
Power: 121 hp
Engine: 828B4.000 I4, Petrol
Center bore: 58.1 mm
Bolt pattern: 4x98
Thread: M12 x 1.25

Check price on Amazon · 175/70R14 Wheels 14x5.5 ET34 · 4x98 · 58.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
175/70R14 82S	Rim 14x5.5 ET34 4x98	26 psi
185/60R15 84H	Rim 15x5.5 ET34 4x98	26 psi
195/50R16 84V	Rim 16x6 ET35 4x98	29 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.