Lincoln Continental Mark III Continental Mark III
1968–1971 1 trimContinental Mark III All trims N/A · N/A 195/75R14 2 fitments
- Generation
- Continental Mark III · 1968–1971
- Power
- N/A
- Engine
- N/A
- Center bore
- N/A
- Bolt pattern
- 5x127
- Thread
- N/A
1968 Lincoln Continental Mark III tire and wheel sizes, bolt pattern and tire pressure
Bolt pattern 5x127 on every 1968 trim.
Tires for the 1968 Lincoln Continental Mark III
Sizes most trims come with first. Open your trim below for its exact size.
TireWheelGuide may earn a commission from purchases made through these links.
- Trims sold in 1968
- 1
- Generation
- Continental Mark III
- Other years
-
- 1968
1 trim sold in 1968
Open a trim for its tire and rim sizes, bolt pattern and tire pressure.
No trims match these filters
Try a trim name or an engine size like 2.0L.
What these columns mean
- Rim size
- Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
- Bolt pattern (PCD)
- Number of studs and the diameter of the circle they sit on. It must match exactly.
- Center bore
- Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
- Pressure
- Recommended cold inflation pressure for that axle, in psi.
- Thread size
- Lug bolt or nut thread — needed when buying aftermarket fasteners.
- Trims sold in 1968
- 1
- Generation
- Continental Mark III
- Other years
-
- 1968
Considering a different size?
Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.
