2010 Lincoln Mark LT tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 6x135 on every 2010 trim.

Tires for the 2010 Lincoln Mark LT

Sizes most trims come with first. Open your trim below for its exact size.

265/60R18 Best-rated standard on 1 trim

Check price on Amazon · 265/60R18
235/70R17 Best-rated optional on 1 trim

Check price on Amazon · 235/70R17
235/75R17 Best-rated optional on 1 trim

Check price on Amazon · 235/75R17

Also listed: 245/70R17 255/65R17 255/70R17 265/70R17 255/65R18 275/65R18 275/55R20 275/45R22

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2010: 1
Generation: II
Other years: 2005
2006
2007
2008
2010
2011
2012
2013
All years (2005–2014)

1 trim sold in 2010

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Lincoln Mark LT II

2010–2014 1 trim

Mark LT 5.4 310 hp · V8 265/60R18 109T 12 fitments

Generation: II · 2010–2014
Power: 310 hp
Engine: V8, Petrol
Center bore: 87.1 mm
Bolt pattern: 6x135
Thread: M14 x 2.0

Check price on Amazon · 265/60R18 Wheels 18x7.5 ET44 · 6x135 · 87.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
265/60R18 109T	Rim 18x7.5 ET44 ~~6x135~~	35 psi
235/70R17 108S	Rim 17x7.5 ET44 ~~6x135~~	38 psi
235/75R17 108S	Rim 17x7.5 ET44 ~~6x135~~	35 psi
245/70R17 114S	Rim 17x7.5 ET44 ~~6x135~~	50 psi
255/65R17	Rim 17x7.5 ET44 ~~6x135~~	50 psi
255/70R17 110S	Rim 17x7.5 ET44 ~~6x135~~	35 psi
265/70R17	Rim 17x7.5 ET44 ~~6x135~~	35 psi
255/65R18	Rim 18x7.5 ET44 ~~6x135~~	35 psi
275/65R18 114T	Rim 18x7.5 ET44 ~~6x135~~	35 psi
275/65R18 113S	Rim 18x7.5 ET44 ~~6x135~~	40 psi
275/55R20 111T	Rim 20x8.5 ET44 ~~6x135~~	35 psi
275/45R22	Rim 22x9 ET44 ~~6x135~~	35 psi

How to read 109T: 109 is the load index (up to 2,271 lb / 1,030 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET44 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.