2008 Mercury Montego tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2008 trim.

Tires for the 2008 Mercury Montego

Sizes most trims come with first. Open your trim below for its exact size.

  1. 215/60R17 Best-rated standard on 1 trim
  2. 235/55R17 Best-rated optional on 1 trim
  3. 215/55R18 Best-rated optional on 1 trim

Also listed: 235/50R18 235/45R19 255/40R19 265/35R20

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2008
1
Generation
III

1 trim sold in 2008

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mercury Montego III

2005–2009 1 trim
Montego 3.5i 263 hp · 3.5L V6 215/60R17 98H 7 fitments
Generation
III · 2005–2009
Power
263 hp
Engine
3.5L V6, Petrol
Center bore
67.1 mm
Bolt pattern
5x114.3
Thread
1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psi
215/60R17 98HRim 17x7 ET52 5x114.330 psi
215/55R18 97VRim 18x7 ET52 5x114.333 psi
235/55R17 98VRim 17x7.5 ET50 5x114.333 psi
235/50R18 97VRim 18x7.5 ET50 5x114.333 psi
235/45R19 95WRim 19x8 ET47 5x114.336 psi
255/40R19 95WRim 19x8.5 ET43 5x114.336 psi
265/35R20 93ZRim 20x9 ET40 5x114.339 psi

How to read 98H: 98 is the load index (up to 1,653 lb / 750 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET52 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2008
1
Generation
III
Other years
All years (2005–2009)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator