1988 Mercury Tracer tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x114.3 on every 1988 trim.

Tires for the 1988 Mercury Tracer

Sizes most trims come with first. Open your trim below for its exact size.

155xR13 standard on 1 trim

Check price on Amazon · 155xR13
165/80R13 Best-rated optional on 1 trim

Check price on Amazon · 165/80R13
185/70R13 Best-rated optional on 1 trim

Check price on Amazon · 185/70R13

Also listed: 165/70R14 175/65R14 185/65R14 195/60R14 175/60R15 195/55R15 185/50R16 205/45R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1988: 1
Generation: l
Other years: 1988
1989
1990
1991
1992
1993
1994
1995
All years (1988–1999)

1 trim sold in 1988

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mercury Tracer l

1988–1990 1 trim

Tracer 1.6i 82 hp · I4 155x R13 84Q 11 fitments

Generation: l · 1988–1990
Power: 82 hp
Engine: I4, Petrol
Center bore: 67.1 mm
Bolt pattern: 4x114.3
Thread: M12 x 1.5

Check price on Amazon · 155xR13 Wheels 13x5 ET45 · 4x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
155x R13 84Q	Rim 13x5 ET45 ~~4x114.3~~	25 psi
165/80R13 84Q	Rim 13x5 ET45 ~~4x114.3~~	26 psi
185/70R13 82S	Rim 13x5.5 ET47 ~~4x114.3~~	28 psi
165/70R14 82S	Rim 14x5 ET45 ~~4x114.3~~	28 psi
175/65R14 81T	Rim 14x5.5 ET47 ~~4x114.3~~	29 psi
185/65R14 81T	Rim 14x5.5 ET47 ~~4x114.3~~	29 psi
195/60R14 81T	Rim 14x6 ET42 ~~4x114.3~~	29 psi
175/60R15 80T	Rim 15x5.5 ET47 ~~4x114.3~~	29 psi
195/55R15 79H	Rim 15x6.5 ET40 ~~4x114.3~~	32 psi
185/50R16 79H	Rim 16x6 ET42 ~~4x114.3~~	32 psi
205/45R16 79V	Rim 16x7 ET38 ~~4x114.3~~	35 psi

How to read 84Q: 84 is the load index (up to 1,102 lb / 500 kg per tire) and Q the speed rating (up to 99 mph / 160 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.