2008 Nissan Altima tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2008 trim.

Tires for the 2008 Nissan Altima

Sizes most trims come with first. Open your trim below for its exact size.

215/60R16 Best-rated standard on 2 trims

Check price on Amazon · 215/60R16
215/55R17 Best-rated optional on 1 trim

Check price on Amazon · 215/55R17
235/45R18 Best-rated optional on 1 trim

Check price on Amazon · 235/45R18

Best tires for the 2008 Nissan Altima

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2008: 2
Generation: IV
Other years: 2004
2005
2006
2007
2008
2009
2010
2011
All years (1993–2026)

Best tires for the 2008 Nissan Altima

2 trims sold in 2008

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Nissan Altima IV

2007–2013 2 trims

Altima 2.5 175 hp · 2.5L I4 215/60R16 94T 1 fitment

Generation: IV · 2007–2013
Power: 175 hp
Engine: 2.5L I4, Petrol
Center bore: 66.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.25

Check price on Amazon · 215/60R16 Wheels 16x7 ET45 · 5x114.3 · 66.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
215/60R16 94T	Rim 16x7 ET45 5x114.3	29 psi

How to read 94T: 94 is the load index (up to 1,477 lb / 670 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Altima 3.5 270 hp · 3.5L V6 215/60R16 94T 3 fitments

Generation: IV · 2007–2013
Power: 270 hp
Engine: 3.5L V6, Petrol
Center bore: 66.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.25

Check price on Amazon · 215/60R16 Wheels 16x7 ET45 · 5x114.3 · 66.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
215/60R16 94T	Rim 16x7 ET45 5x114.3	29 psi
215/55R17 93V	Rim 17x7.5 ET45 5x114.3	33 psi
235/45R18 94V	Rim 18x7.5 ET45 5x114.3	33 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.