1982 Nissan Fairlady Z tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x114.3 on every 1982 trim.

Tires for the 1982 Nissan Fairlady Z

Sizes most trims come with first. Open your trim below for its exact size.

TireWheelGuide may earn a commission from purchases made through these links.

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

1978–1983 Japan 4 trims

Fairlady Z 2.0i E-GS130 (Coupe) +2 variants 129 hp · 2.0 L L20E I6 Petrol 2.0 L L20E I6 195/70HR14 / 195/70HR14 5 fitments

Same tires and wheels on: 2.8i E-HGS130 (Coupe), 2.8i E-HS130 (Coupe)

Check price on Amazon · 195/70R14 Check price on Amazon · 195/70R14 Wheels 14x · 4x114.3 · 73.1 mm on Amazon

Fit	Tire size	Rim size and bolt pattern	Pressure, psi
OE	Front195/70HR14	Rim 14x ~~4x114.3~~	–
	Rear195/70HR14	Rim ~~4x114.3~~	–
Alt	Front195/70HR14	Rim 14x ~~4x114.3~~	–
	Rear195/70HR14	Rim ~~4x114.3~~	–
Alt	195/65HR15	Rim 15x6 ET10 ~~4x114.3~~	–
Alt	Front195/65HR15	Rim 15x6 ET10 ~~4x114.3~~	–
	Rear215/60HR15	Rim 15x7 ET10 ~~4x114.3~~	–
Alt	205/60HR15	Rim 15x6.5 ET10 ~~4x114.3~~	–

Fairlady Z 2.0i E-S130 (Coupe) 129 hp · 2.0 L L20E I6 Petrol 2.0 L L20E I6 195/70HR14 / 195/70HR14 5 fitments

Check price on Amazon · 195/70R14 Check price on Amazon · 195/70R14 Wheels 14x · 4x114.3 · 73.1 mm on Amazon

Fit	Tire size	Rim size and bolt pattern	Pressure, psi
OE	Front195/70HR14	Rim 14x ~~4x114.3~~	–
	Rear195/70HR14	Rim ~~4x114.3~~	–
Alt	Front195/70HR14	Rim 14x ~~4x114.3~~	–
	Rear195/70HR14	Rim ~~4x114.3~~	–
Alt	Front195/65HR15	Rim 15x6 ET10 ~~4x114.3~~	–
	Rear215/60HR15	Rim 15x7 ET10 ~~4x114.3~~	–
Alt	195/65HR15	Rim 15x6 ET10 ~~4x114.3~~	–
Alt	205/60HR15	Rim 15x6.5 ET10 ~~4x114.3~~	–

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.