2004 Nissan Fairlady Z tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2004 trim.

Tires for the 2004 Nissan Fairlady Z

Sizes most trims come with first. Open your trim below for its exact size.

225/50R17 front + 235/50R17 rear Best-rated standard on 2 trims

Check price on Amazon · 225/50R17 front Check price on Amazon · 235/50R17 rear
225/45R18 front + 245/45R18 rear Best-rated optional on 2 trims

Check price on Amazon · 225/45R18 front Check price on Amazon · 245/45R18 rear

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2004: 2
Generation: V (Z33)
Other years: 1999
2000
2002
2003
2004
2005
2006
2007
All years (1969–2027)

2 trims sold in 2004

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Nissan Fairlady Z V (Z33)

2002–2008 2 trims

Fairlady Z 3.5i (HZ33) +1 variant 276 hp · V6 225/50R17 94V / 235/50R17 96V 2 fitments

Same tires and wheels on: 3.5i (Z33)

Generation: Z33 · 2002–2008
Power: 276 hp
Engine: V6, Petrol
Center bore: 66 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.25

Check price on Amazon · 225/50R17 Check price on Amazon · 235/50R17 Wheels 17x7.5 ET30 · 5x114.3 · 66 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
Front225/50R17 94V	Rim 17x7.5 ET30 ~~5x114.3~~	–
Rear235/50R17 96V	Rim 17x8 ET33 ~~5x114.3~~	–
Front225/45R18 91W	Rim 18x8 ET30 ~~5x114.3~~	–
Rear245/45R18 96W	Rim 18x8.5 ET33 ~~5x114.3~~	–

How to read 94V: 94 is the load index (up to 1,477 lb / 670 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET30 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.