1992 Nissan March tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1992 trim.

Tires for the 1992 Nissan March

Sizes most trims come with first. Open your trim below for its exact size.

  1. 145xR12 standard on 2 trims
  2. 155/70R13 Best-rated standard on 1 trim · optional on 1
  3. 175/65R13 Best-rated standard on 1 trim

Also listed: 155xR13 175/60R13

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1992
4
Generations
II (K11)I (K10)

4 trims sold in 1992

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Nissan March II (K11)

1992–2002 2 trims
March 1.0 (K11) 58 hp · I4 145x R12 2 fitments
Generation
K11 · 1992–2002
Power
58 hp
Engine
I4, Petrol
Center bore
59.1 mm
Bolt pattern
4x100
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
145x R12Rim 12x4 ET45 4x100–
155/70R13 75SRim 13x5 ET45 4x100–
March 1.3 (HK11) 78 hp · I4 155/70R13 75S 2 fitments
Generation
K11 · 1992–2002
Power
78 hp
Engine
I4, Petrol
Center bore
59.1 mm
Bolt pattern
4x100
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
155/70R13 75SRim 13x5 ET45 4x100–
175/60R13 76HRim 13x5 ET45 4x100–

How to read 75S: 75 is the load index (up to 853 lb / 387 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Nissan March I (K10)

1982–1992 2 trims
March 1.0 (K10) 51 hp · I4 145x R12 1 fitment
Generation
K10 · 1982–1992
Power
51 hp
Engine
I4, Petrol
Center bore
59.1 mm
Bolt pattern
4x100
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
145x R12Rim 12x4 ET45 4x100–
March 1.0 Turbo (EK10) 109 hp · I4 175/65R13 2 fitments
Generation
K10 · 1982–1992
Power
109 hp
Engine
I4, Petrol
Center bore
59.1 mm
Bolt pattern
4x100
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
175/65R13Rim 13x4 ET45 4x100–
155x R13Rim 13x5 ET45 4x100–
What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1992
4
Generations
II (K11)I (K10)
Other years
All years (1982–2026)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator