1988 Nissan Maxima tire and wheel sizes, bolt pattern and tire pressure

Bolt patterns 5x114.3 (Europe) or 4x114.3 (USA), depending on the market version.

Tires for the 1988 Nissan Maxima

Sizes most trims come with first. Open your trim below for its exact size.

  1. 195/60R15 Best-rated standard on 1 trim · USA
  2. 205/65R15 Best-rated standard on 1 trim · Europe
  3. 195/65R15 Best-rated optional on 1 trim · Europe

Also listed: 215/65R15

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1988
2
Generations
III (J30)II (PU11) sold in 2 market versions

2 trims sold in 1988

Sold in 2 market versions with different tire sizes and bolt patterns. Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Nissan Maxima III (J30)

1988–1994 Europe 1 trim
Maxima 3.0 168 hp · V6 205/65R15 93H 4 fitments
Generation
J30 · 1988–1994
Market
Europe
Power
168 hp
Engine
V6, Petrol
Center bore
66.1 mm
Bolt pattern
5x114.3
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
205/65R15 93HRim 15x6 ET40 5x114.329 psi
195/65R15 91VRim 15x6 ET40 5x114.335 psi
215/65R15 96VRim 15x6 ET40 5x114.332 psi
205/65R15 94VRim 15x6.5 ET40 5x114.332 psi

How to read 93H: 93 is the load index (up to 1,433 lb / 650 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET40 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Nissan Maxima II (PU11)

1985–1988 USA 1 trim
Maxima 3.0 157 hp · V6 195/60R15 86H 1 fitment
Generation
PU11 · 1985–1988
Market
USA
Power
157 hp
Engine
V6, Petrol
Center bore
66.1 mm
Bolt pattern
4x114.3
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
195/60R15 86HRim 15x6 ET40 4x114.333 psi

How to read 86H: 86 is the load index (up to 1,168 lb / 530 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET40 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1988
2
Generations
III (J30)II (PU11) sold in 2 market versions
Other years
All years (1981–2023)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator