1998 Nissan Micra tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1998 trim.

Tires for the 1998 Nissan Micra

Sizes most trims come with first. Open your trim below for its exact size.

155/70R13 Best-rated standard on 5 trims

Check price on Amazon · 155/70R13
175/60R13 Best-rated optional on 5 trims

Check price on Amazon · 175/60R13
165/60R14 Best-rated optional on 5 trims

Check price on Amazon · 165/60R14

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1998: 5
Generation: II (K11)
Other years: 1994
1995
1996
1997
1998
1999
2000
2001
All years (1982–2027)

5 trims sold in 1998

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Nissan Micra II (K11)

1992–2000 5 trims

Micra 1.0i +4 variants 54 hp · I4 155/70R13 75T 7 fitments

Same tires and wheels on: 1.3i, 1.5 D

Generation: K11 Facelift · 1998–2000
Power: 54 hp
Engine: I4, Petrol
Center bore: 59.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.25

Check price on Amazon · 155/70R13 Wheels 13x4.5 ET45 · 4x100 · 59.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
155/70R13 75T	Rim 13x4.5 ET45 ~~4x100~~	32 psi
155/70R13 75T	Rim 13x5 ET45 ~~4x100~~	32 psi
175/60R13 76H	Rim 13x5 ET45 ~~4x100~~	32 psi
175/60R14 79H	Rim 14x5 ET45 ~~4x100~~	33 psi
165/60R14 75T	Rim 14x5.5 ET45 ~~4x100~~	33 psi
185/60R14 82H	Rim 14x5.5 ET45 ~~4x100~~	33 psi
185/60R14 82H	Rim 14x6 ET45 ~~4x100~~	33 psi

How to read 75T: 75 is the load index (up to 853 lb / 387 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.