2005 Nissan Micra tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 2005 trim.

Tires for the 2005 Nissan Micra

Sizes most trims come with first. Open your trim below for its exact size.

165/70R14 Best-rated standard on 10 trims

Check price on Amazon · 165/70R14
175/60R15 Best-rated optional on 10 trims

Check price on Amazon · 175/60R15
185/50R16 Best-rated optional on 10 trims

Check price on Amazon · 185/50R16

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2005: 10
Generation: III (K12)
Other years: 2001
2002
2003
2004
2005
2006
2007
2008
All years (1982–2027)

10 trims sold in 2005

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Nissan Micra III (K12)

2003–2007 10 trims

Micra 1.0i +9 variants 64 hp · I4 165/70R14 81T 3 fitments

Same tires and wheels on: 1.2i, 1.4i, 1.5 dCi

Generation: K12 Facelift · 2005–2007
Power: 64 hp
Engine: I4, Petrol
Center bore: 60.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.5

Check price on Amazon · 165/70R14 Wheels 14x5 ET45 · 4x100 · 60.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
165/70R14 81T	Rim 14x5 ET45 ~~4x100~~	32 psi
175/60R15 81H	Rim 15x5.5 ET50 ~~4x100~~	30 psi
185/50R16 81H	Rim 16x6 ET55 ~~4x100~~	33 psi

How to read 81T: 81 is the load index (up to 1,019 lb / 462 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.