2010 Nissan Moco tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 2010 trim.

Tires for the 2010 Nissan Moco

Sizes most trims come with first. Open your trim below for its exact size.

165/55R14 Best-rated standard on 1 trim · optional on 1

Check price on Amazon · 165/55R14
155/65R13 Best-rated standard on 1 trim

Check price on Amazon · 155/65R13

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2010: 2
Generation: II
Other years: 2006
2007
2008
2009
2010
2011
2012
2013
All years (2002–2016)

2 trims sold in 2010

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Nissan Moco II

2006–2011 2 trims

Moco 0.7i (MG22S) 54 hp · I3 155/65R13 73S 2 fitments

Generation: II · 2006–2011
Power: 54 hp
Engine: I3, Petrol
Center bore: 54.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.25

Check price on Amazon · 155/65R13 Wheels 13x4 ET45 · 4x100 · 54.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
155/65R13 73S	Rim 13x4 ET45 4x100	–
165/55R14 72V	Rim 14x4.5 ET50 4x100	–

How to read 73S: 73 is the load index (up to 805 lb / 365 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Moco 0.7i Turbo (MG22S) 59 hp · I3 165/55R14 72V 1 fitment

Generation: II · 2006–2011
Power: 59 hp
Engine: I3, Petrol
Center bore: 54.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.25

Check price on Amazon · 165/55R14 Wheels 14x4.5 ET50 · 4x100 · 54.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
165/55R14 72V	Rim 14x4.5 ET50 4x100	–

How to read 72V: 72 is the load index (up to 783 lb / 355 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.