1984 Nissan Prairie tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x114.3 on every 1984 trim.

Tires for the 1984 Nissan Prairie

Sizes most trims come with first. Open your trim below for its exact size.

185/70R13 front + 195/70R14 rear Best-rated standard on 1 trim

Check price on Amazon · 185/70R13 front Check price on Amazon · 195/70R14 rear
185/70R14 Best-rated standard on 1 trim

Check price on Amazon · 185/70R14

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1984: 2
Generation: I (M10)
Other years: 1983
1984
1985
1986
1987
1988
1989
1990
All years (1983–1995)

2 trims sold in 1984

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Nissan Prairie I (M10)

1982–1988 2 trims

Prairie 1.5 S 74 hp · I4 185/70R14 86T 1 fitment

Generation: M10 · 1982–1988
Power: 74 hp
Engine: I4, Petrol
Center bore: 66.1 mm
Bolt pattern: 4x114.3
Thread: M12 x 1.25

Check price on Amazon · 185/70R14 Wheels 14x5 ET45 · 4x114.3 · 66.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
185/70R14 86T	Rim 14x5 ET45 4x114.3	28 psi

How to read 86T: 86 is the load index (up to 1,168 lb / 530 kg per tire) and T the speed rating (up to 118 mph / 190 km/h). ET45 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Prairie 1.8 SGL 87 hp · I4 185/70R13 86T / 195/70R14 1 fitment

Generation: M10 · 1982–1988
Power: 87 hp
Engine: I4, Petrol
Center bore: 66.1 mm
Bolt pattern: 4x114.3
Thread: M12 x 1.25

Check price on Amazon · 185/70R13 Check price on Amazon · 195/70R14 Wheels 13x5 ET45 · 4x114.3 · 66.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
Front185/70R13 86T	Rim 13x5 ET45 4x114.3	28 psi
Rear195/70R14	Rim 14x6 ET30 4x114.3	29 psi

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.