1988 Nissan Sunny RZ-1 tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 4x100 on every 1988 trim.

Tires for the 1988 Nissan Sunny RZ-1

Sizes most trims come with first. Open your trim below for its exact size.

175/70R13 Best-rated standard on 1 trim · optional on 1

Check price on Amazon · 175/70R13
155xR13 standard on 1 trim

Check price on Amazon · 155xR13
185/60R14 Best-rated optional on 1 trim

Check price on Amazon · 185/60R14

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1988: 2
Generation: B12
Other years: 1986
1987
1988
1989
All years (1986–1989)

2 trims sold in 1988

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Nissan Sunny RZ-1 B12

1986–1989 2 trims

Sunny RZ-1 1.5 (FB12) 84 hp · I4 155x R13 2 fitments

Generation: B12 · 1986–1989
Power: 84 hp
Engine: I4, Petrol
Center bore: 59.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.25

Check price on Amazon · 155xR13 Wheels 13x5 ET40 · 4x100 · 59.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
155x R13	Rim 13x5 ET40 ~~4x100~~	–
175/70R13 82S	Rim 13x5 ET40 ~~4x100~~	–

Sunny RZ-1 1.6 (EB12) 118 hp · I4 175/70R13 82S 2 fitments

Generation: B12 · 1986–1989
Power: 118 hp
Engine: I4, Petrol
Center bore: 59.1 mm
Bolt pattern: 4x100
Thread: M12 x 1.25

Check price on Amazon · 175/70R13 Wheels 13x5 ET40 · 4x100 · 59.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
175/70R13 82S	Rim 13x5 ET40 ~~4x100~~	–
185/60R14 82H	Rim 14x5.5 ET40 ~~4x100~~	–

How to read 82S: 82 is the load index (up to 1,047 lb / 475 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET40 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.