1992 Opel Calibra tire and wheel sizes, bolt pattern and tire pressure

Bolt patterns 5x110 or 4x100, depending on the market version.

Tires for the 1992 Opel Calibra

Sizes most trims come with first. Open your trim below for its exact size.

  1. 195/60R15 Best-rated standard on 1 trim · optional on 1
  2. 175/70R14 Best-rated standard on 1 trim
  3. 205/50R16 front + 225/45R16 rear Best-rated standard on 1 trim

Also listed: 205/55R15 205/45R16 205/50R16 215/40R17 195/60R14 205/40R17 235/40R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1992
3
Generation
I

3 trims sold in 1992

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Opel Calibra I

1990–1997 3 trims
Calibra 2.0 Turbo 204 hp · 2.0L C20LET I4 205/50R16 / 225/45R16 3 fitments
Generation
I · 1990–1997
Power
204 hp
Engine
2.0L C20LET I4, Petrol
Center bore
65.1 mm
Bolt pattern
5x110
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
Front205/50R16Rim 16x7 ET42 5x110–
Rear225/45R16Rim 16x7 ET42 5x110–
215/40R17Rim 17x7.5 ET40 5x110–
235/40R17Rim 17x8 ET30 5x110–
Calibra 2.0i 150 hp · 2.0L C20XE I4 195/60R15 7 fitments
Generation
I · 1990–1997
Power
150 hp
Engine
2.0L C20XE I4, Petrol
Center bore
56.6 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
195/60R15Rim 15x6 ET49 4x100–
205/55R15Rim 15x6 ET49 4x100–
205/50R16Rim 16x6 ET49 4x100–
205/50R16Rim 16x7 ET42 4x100–
205/45R16Rim 16x7 ET42 4x100–
205/40R17Rim 17x7.5 ET40 4x100–
215/40R17Rim 17x7.5 ET40 4x100–
Calibra 2.0i 118 hp · 2.0L C20NE I4 175/70R14 7 fitments
Generation
I · 1990–1997
Power
118 hp
Engine
2.0L C20NE I4, Petrol
Center bore
56.6 mm
Bolt pattern
4x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
175/70R14Rim 14x5.5 ET49 4x100–
195/60R14Rim 14x5.5 ET49 4x100–
195/60R15Rim 15x6 ET49 4x100–
205/55R15Rim 15x6 ET49 4x100–
205/50R16Rim 16x6 ET49 4x100–
205/50R16Rim 16x7 ET42 4x100–
205/45R16Rim 16x7 ET42 4x100–
What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1992
3
Generation
I
Other years
All years (1990–1997)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator